|
|
 |
|
http://blog.genuineobservations.com/2010/04/18/ormus-is-this-the-wet-method/
http://blog.genuineobservations.com/2010/05/27/ormus-ormes-and-sea-salt-update/comment-page-1/#comment-196
|
|
Day 1: Mixed 2 cups mineral water
w/ half cup of grey celtic sea salt.
Solution is about 500 ml. Allow to rest for 1 day.
Day 2: Resulting seawater is ~ pH 5.9 > Filter it
(thru Buchner Funnel).
Lye Solution is ~ pH 12.7. Slowly added 125ml lye. Measured pH at
~
10.5. Slowly added more lye until pH ~ 10.6 – 10.7. Total solution
at
600 ml; Rest for 2 days in grounded metal container.
Day 4: Precipitate at 300 ml mark; Drained substrate to
350 ml mark from
600 ml; Added distilled H20 back to 600 ml mark; Rest for a day
in
container…
Day 5: Precipitate at 300 ml mark; drained substrate to
400 ml mark;
added distilled H2O back to 600 ml mark; A few M-state bubbles
escaped
when moving beaker; Rest for a day…
Day 6: Repeat above procedure; no m-state bubbles
observed (hope shield
is working); Rest for a day…
Day 7: Repeat above procedure; for some reason the
solution is at the
650 ml mark (I recall adding water to the 600 ml mark – I could
be
wrong); Drained substrate; Added water to 600 ml mark; A few
m-state
bubbles observed; Rest for a day…
Day 8: Precipitate has grown to 350 ml mark; Substrate
is milky; Boil
solution in double boiler config. for 5 min. at the level of
the
precipitate; Rest for a day…
Day 9: Drained substrate to 425 ml mark before changing
pH, currently
10.6; Slowly Added 225 ml lye, pH 12.3 to obtain ~ pH 12 in
solution;
Drain off a little more substrate back to 600 ml mark; Filtered
through
Buchner funnel; Filtrate at 550 ml mark in funnel.
|
Returned filtrate to beaker; Slowly added white
distilled vinegar at pH
~2.3; Colloidal suspensions begin forming; Stopped adding vinegar
/
stirring solution at pH 10.8 – 10.7, solution at 700 ml mark; pH
is
lowering on its own; Gelatinous ORMUS forms @ ~ pH 10.5;
definite
“tingling” sensation in my palm as I hold the beaker of ORMUS;
definite
“buzzing” in my head as I focus on the ORMUS. |
Allow ORMUS to settle for a day before washing
with distilled water; pH
remains stable at 10.5 with successive washings; Allow ORMUS to
settle
overnight; Drain off substrate / dry the ORMUS according to your
needs. |
| |